basic power industries
177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355

Specialty Tools


Grid View ActiveView as Grid

GLM90095


Bearing Carrier Puller, Mercruiser, Mercury, Mariner

Bearing Carrier Puller, Mercruiser, Mercury, Mariner

Bearing Carrier Puller, capacity: 5 tons (min.) for Mercruiser, Mercury/Mariner all style bearing carriers & most propellers No limited warranty on this item!

$79.95




GLM90200


Hinge Pin Tool, Mercruiser

Hinge Pin Tool, Mercruiser

Hinge Pin Installation/Removal tool. Removes/installs hinge pins for all Mercruiser drive units. The hinge pin connects the bell housing to the gimbal ring and allows the unit to tilt. You normally...

$15.95




SMI01117


Oil - Fuel Filter Wrench

Oil - Fuel Filter Wrench

This handy wrench removes screw on type marine water separator fuel filters and most oil filters Tough, forged stainless steel

$22.95





GLM90260


Pinion Bearing Installation Tool, Mercruiser

Pinion Bearing Installation Tool, Mercruiser

Pinion Bearing Installation Tool to precisely fit the pinion bearing (must remove paper cone) to avoid crooked seating that causes gears to break or make noise on Mercruiser Drives. This item...

$26.95




SMI01112


Propeller Nut Wrench (Metal) Mercury, Mariner, and Mercruiser

Propeller Nut Wrench (Metal) Mercury, Mariner, and Mercruiser

Includes nut and 2 tab washers, Removes and Installs all Mercury Outboards (65 HP and up); Mercruisers (110 - 260 HP) Standard Units Wrench replaces 91-95830A1; Nut replaces 11-52707; Tab Washers...

$15.95




GLM90065


Propeller Wrench Set, Mercruiser, Mercury, Mariner, Force, Honda, 1-1/16"

Propeller Wrench Set, Mercruiser, Mercury, Mariner, Force, Honda, 1-1/16"

1-1/16" Propeller Wrench Kit (blue) for Mercury/Mariner/Force V4 & V6, 75, 90, 100, 115, 125, 135, 150, 175, 200, 225, 250 HP; all Mercruiser; Honda BF75-BF130 comes with GLM21271 OEMs: Mercury:...

$12.29





SIE18-79820


Puller Gimbal Bearing Removal Tool for Mercruiser OMC Volvo Sierra 18-79820

Puller Gimbal Bearing Removal Tool for Mercruiser OMC Volvo Sierra 18-79820

Gimbal Bearing Puller Tool for Mercruiser, OMC and Volvo Penta sterndrives. Sometimes the gimbal bearing can be a real pain to remove. This tool is designed to get the toughest gimbal bearing out.

$249.95




SIE18-9781


Pump Oil for Lower Unit Fits Quart Bottles

Pump Oil for Lower Unit Fits Quart Bottles

Oil Pump for Quart bottle, 4 cc pump and 3/8" - 16 swivel metal marine filler fitting. Ideal for adding Gear Lube and other fluids to small engines and marine lower units. Flexible Hose for...

$15.95




GLM90110


Shift Cable Tool, Mercruiser

Shift Cable Tool, Mercruiser

Shift Cable Tool for a Mercruiser Sterndrive. It will install/remove shift cables on Mercruiser 1, R, MR, & Alpha One Gen. II Drives. This item replaces Merc. OEM: 91-12037.

$24.95





GLM90140


Shift Shaft Tool, Mercruiser

Shift Shaft Tool, Mercruiser

Shift Shaft Bushing Tool for a Mercruiser Sterndrive. It removes and installs the Bushings in the gearcase of the following Drive units: MC-1/R/MR/Alpha one. This item replaces Mercruiser OEM: #...

$16.95




MAL9-79816


Tester Ethanol Fuel Mercury 91-879172T28

Tester Ethanol Fuel Mercury 91-879172T28

Tester for Ethanol percentage. Replaces: Mercury 91-879172T28 Instructions: Fill with water to the line, fill with gas to the neck, put lid on and shake vigorously, stand vertical with cap on, let...

$6.95




SIE18-9809


Tool Bearing Carrier Retainer Mercruiser Bravo 91-17257

Tool Bearing Carrier Retainer Mercruiser Bravo 91-17257

Bearing Carrier Retainer Tool for Mercruiser Bravo Drives Replaces: Mallory 9-79810 Mercury Marine 91-17257

$179.99





GLM90190


Tool Bearing Carrier Retainer wrench Lower Unit Mercruiser 91-61069T

Tool Bearing Carrier Retainer wrench Lower Unit Mercruiser 91-61069T

Bearing Carrier Retainer Tool removes and installs bearing carrier retainer nuts on Mercruiser Bravo One, MC-I, R MR; and Alpha One, Gen. II; and TRS; drive units and Mercury Mariner Outboards with 4...

$79.95




GLM90360


Tool Bellow Expander for Mercruiser Alpha 1 Bravo 91-45497A1

Tool Bellow Expander for Mercruiser Alpha 1 Bravo 91-45497A1

Bellows Expander Tool which installs the exhaust bellows on the MC-1, R-MR, Alpha One, Bravo 1, Bravo 2 and Blackhawk drive Units. To use this tool on pre-Alpha, Alpha and Gen II Models, the upper...

$49.95




GLM90470


Tool Bellow Sleeve Installer Mercruiser Bravo Alpha 1 Gen 2 91-818162

Tool Bellow Sleeve Installer Mercruiser Bravo Alpha 1 Gen 2 91-818162

U-Joint Bellow Sleeve Installation Tool Installs the aluminum sleeve in the u-joint bellows of all Bravo, Alpha One/Gen II, Blackhawk drive units Replaces #:91-818162; Sierra #...

$49.95





SIE18-9870


Tool Bellow Sleeve Installer Mercruiser Bravo Alpha 1 Gen 2 91-818162

Tool Bellow Sleeve Installer Mercruiser Bravo Alpha 1 Gen 2 91-818162

U-Joint Bellow Sleeve Installation Tool Installs the aluminum sleeve in the u-joint bellows of all Bravo, Alpha One Gen II, Blackhawk drive units Replaces #:91-818162; Sierra # 18-9870 

$34.95




GLM90170


Tool Drive Gear Shimming for Mercruiser R MR Alpha and Gen 2 91-60523

Tool Drive Gear Shimming for Mercruiser R MR Alpha and Gen 2 91-60523

Drive Gear Shimming Tool that measures upper unit drive gear clearance on Mercruiser 1, R, MR, Alpha One Gen. II Drives. Replaces Merc. OEM: 91-60523.

$129.95




GLM90220


Tool Drive Shaft Adapter for Mercruiser 91-56775T

Tool Drive Shaft Adapter for Mercruiser 91-56775T

Drive Shaft Adapter provides a wrench surface to turn the drive shaft on Mercruiser 1, R, MR, Alpha One Gen.II drive units and many outboard engines with a 13 spline drive shaft. Replaces Merc. OEM:...

$26.95





GLM90240


Tool Drive Shaft Bearing Retainer Wrench for Mercruiser 91-43506

Tool Drive Shaft Bearing Retainer Wrench for Mercruiser 91-43506

Drive Shaft Bearing Retainer Wrench removes and installs threaded bearing retainer under the water pump housing on Mercruiser sterndrives and Mercury Mariner outboards. OEM: 91-43506

$36.95




SIE18-9874


Tool Drive Shaft Preload For Mercruiser and Mercury 91-14311A2

Tool Drive Shaft Preload For Mercruiser and Mercury 91-14311A2

Drive Shaft Preload Tool. Preloads drive shaft bearing when checking pinion height and backlash on MC-I, R-MR, Alpha One, Alpha One/ Gen II drive units and outboards. Replaces: Mercury Marine...

$179.95




GLM90270


Tool Driver Head for Mercruiser and MercuryLower Unit 91-36569T

Tool Driver Head for Mercruiser and MercuryLower Unit 91-36569T

Driver Head Specialty Tool which removes pinion bearing from MC-1, R-MR, and Alpha One drive units Replaces OEM: 91-36569T

$14.95





GLM90050


Tool Engine Alignment for Mercruiser OMC Cobra SX Volvo SX 91-57797A3

Tool Engine Alignment for Mercruiser OMC Cobra SX Volvo SX 91-57797A3

Engine Alignment Tool that can be used on Mercruiser OMC Cobra OMC SX and Volvo SX stern drives to align the drive to the engine during installation. IF your unit is not aligned properly you WILL...

$89.95




GLM90180


Tool for Mercruiser Upper Unit Driven Gear Shimming 1 R MR Alpha Gen 2 91-60526T

Tool for Mercruiser Upper Unit Driven Gear Shimming 1 R MR Alpha Gen 2 91-60526T

Driven Gear Shimming Tool for a Mercruiser Outdrive. This tool is used to measure the upper driven gear clearance. It will work on the following applications: Mercruiser Models MC-1/R/MR/Alpha...

$218.95




SIE18-79814


Tool Fuel Filter for Mercury Verado and Optimax Engines 91-896661

Tool Fuel Filter for Mercury Verado and Optimax Engines 91-896661

Fuel Filter Tool to remove and install the fuel filter on Optimax and Verado model motors. Replaces: Mercury Marine 91-896661

$6.95





SIE18-79825


Tool Gimbal Bearing Installer Mercruiser OMC Volvo

Tool Gimbal Bearing Installer Mercruiser OMC Volvo

Installation Tool for Gimbal Bearings on Mercruiser, OMC and Volvo Penta SX sterndrives

$44.95




SIE18-9861


Tool Hinge Pin for Mercruiser 1 MR Alpha and Bravo Outvrive 91-78310

Tool Hinge Pin for Mercruiser 1 MR Alpha and Bravo Outvrive 91-78310

Hinge Pin Installation/Removal tool. Removes/installs hinge pins for all Mercruiser drive units. The hinge pin connects the bell housing to the gimbal ring and allows the unit to tilt. You normally...

$15.95




GLM90295


Tool Lower Unit Pinion Bearing Installer and Removal Set Mercruiser

Tool Lower Unit Pinion Bearing Installer and Removal Set Mercruiser

Pinion Bearing Removal and Installation Tool Assembly. Installs and removes pinion bearing on Mercruiser MC-1, R-MR, and Alpha One Lower units Kit Includes: GLM90260 Pinion Bearing Install Tool...

$72.95





SIE18-9841


Tool Pinion Gear Shimming for Mercruiser Bravo 1 Drives 1-42840T

Tool Pinion Gear Shimming for Mercruiser Bravo 1 Drives 1-42840T

Tool Pinion Gear Shimming for Mercruiser Bravo 1 Drives Shimming Tool Replaces: Mercury Marine 91-42840T Description: Shims pinion gear on Bravo One drives.

$179.95




GLM90160


Tool Pinion Gear Shimming Lower Unit for Mercruiser 1 R MR Alpha 91-56048T

Tool Pinion Gear Shimming Lower Unit for Mercruiser 1 R MR Alpha 91-56048T

Pinion Gear Shimming Tool to measure pinion height of Mercruiser 1, R, MR Alpha One and Alpha 1 Generation 2 Drive Units. Replaces OEM: 91-56048T.

$187.95




GLM90210


Tool Pinion Nut Adapter Lower Unit Mercruiser R MR Alpha 91-61067A3

Tool Pinion Nut Adapter Lower Unit Mercruiser R MR Alpha 91-61067A3

Pinion Nut Adapter Kit which holds the pinion nut when removing the pinion gear and drive shaft on Mercruiser MC-I, R-MR, and Alpha One drive units. Comes with one GLM90220 drive shaft adaptor OEM:...

$148.95





GLM90230


Tool Propeller Shaft Adapter Mercury Mariner Mercruiser 91-61077T

Tool Propeller Shaft Adapter Mercury Mariner Mercruiser 91-61077T

Propeller Shaft Adapter. It provides a wrench surface to turn the propeller shaft on Mercruiser 1, R, MR, Alpha One Gen. II Bravo 1 & TRS drive units. Replaces Merc. OEM: # 91-61077T.

$29.95




GLM90280


Tool Puller Rod for Mercruiser Lower Unit Drive Shaft 91-31229

Tool Puller Rod for Mercruiser Lower Unit Drive Shaft 91-31229

Puller Rod used with GLM90260 and GLM90270 tools to install and remove pinion bearing on Mercruiser Drives OEM: 91-31229

$19.95




SIE18-9810


Tool Shift Cable Adjustment for Mercruiser Bravo 91-17262A1

Tool Shift Cable Adjustment for Mercruiser Bravo 91-17262A1

Tool Shift Cable Adjustment for Mercruiser Bravo Fits the Following Applications Mercruiser Bravo Outdrive Adjustment Tool Replaces: Mercury 91-17262A1 Description: Used to install shift cable core...

$29.95







Home New Items My Info My Cart FAQs Ordering Terms Order Status Privacy Contact Us Dealers Subscribe
ebasicpower.com is © 1999- Basic Power Industries, Inc., all rights reserved • All Item specifications and availability are subject to change without notice
Basic Power Industries • 177 Fulford Dr, Harkers Island, NC 28531-9520, US • +1-252-504-3355