basic power industries
177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355

Test Equipment Tools


Grid View ActiveView as Grid

CDI511-9772


Adapter DC Ampmeter Tool Outboard Motor DVA Testing CDI511-9772

Adapter DC Ampmeter Tool Outboard Motor DVA Testing CDI511-9772

511-9772 Ampmeter Adapter Replaces: PL88 Use to replace ignition coil for testing DVA output from ignition pack if a bad coil is suspected.

$64.95




CDI511-9773


Adapter Peak DVA Voltage Test Tool Fluke Meter for Outboard 511-9773

Adapter Peak DVA Voltage Test Tool Fluke Meter for Outboard 511-9773

Peak Reading DVA Voltage Adapter for all Fluke digital volt meters. The readings will be close to the Stevens CD77 and Merc-Otronic specs. Ideal companion with Piercing Probe Set CDI511-9770. (See...

$75.95




CDI551-334M


Adaptor, Metric, Grease Filler

Adaptor, Metric, Grease Filler

Metric Adapter for Grease Filler Replaces 519-34M, 551-33M, 551-34M For all motors except Suzuki.

$11.95  $9.99
Save: 16% off




Max: 3

GLM90095


Bearing Carrier Puller, Mercruiser, Mercury, Mariner

Bearing Carrier Puller, Mercruiser, Mercury, Mariner

Bearing Carrier Puller, capacity: 5 tons (min.) for Mercruiser, Mercury/Mariner all style bearing carriers & most propellers No limited warranty on this item!

$79.95




CDI911-9783


Bullet Connector Kit

Bullet Connector Kit

Bullet Connector Kit Contains: 10 each Male Bullet with Boots, and 10 Female Bullets with Sleeves. Contains 10 pieces each of the male, female connectors and sleeves.

$12.95




CDI511-9773NL


DVA Peak Voltage Adapter without leads

DVA Peak Voltage Adapter without leads

Peak Reading DVA Voltage Adapter for all Fluke digital volt meters. This adapter does not include the leads. If you require one with leads, please order CDI511-9773. The readings will be close to the...

$75.95  $60.99
Save: 20% off




Max: 3

CDI551-33CV


Filler Vent Check Valve

Filler Vent Check Valve

Filler Vent Check Valve Calibrated check valve creates airlock to keep lube from running out while you install drain plug. Includes 4" Hose. A must for all shops! Included with CDI551-33GF.

$20.95




CDI518-88


Fluke 88 Meter Kit with DVA Adapter

Fluke 88 Meter Kit with DVA Adapter

Measures 2 and 4 stroke RPM ranges, volts, ohms, amperage, dwell, and injector pulse width. It has the capability of recording maximum and minimum RPM and volts. Backlight display readout is easy...

$650.95




CDI551-33-1


Gearcase Filler

Gearcase Filler

Gearcase Filler With Check Valve A new design in gearcase fillers makes it easier to fill or flush gearcases. The check valve venting system helps prevent spilling any gear lube. The check valve on...

$159.95





SIE18-9850


Indicator Backlash for Lower Unit Shimming Mercruiser 91-53459

Indicator Backlash for Lower Unit Shimming Mercruiser 91-53459

Backlash Indicator is used to shim the lower unit to determine the spacing of the lower unit gear set. This along with a dial indicator is needed. Replaces: Mercury Marine 91-53459 Description:...

$21.95




MER91-90455-1


Lifting Eye, Mercury, Mariner

Lifting Eye, Mercury, Mariner

Outboard Engine Lifting Eye Threads into flywheel Fits most 2 cycle Mercury/Mariner Outboards from the 30/40 (2 cyl.) on up.

$45.95




CDI511-9775


Load Resistor

Load Resistor

Load Resistor To load the output of ignition modules when testing ignition coils. Used for testing DVA outputs from power packs and switch boxes. Replacement for Stevens PL88.

$18.95





CDI511-9800


Multimeter Resistor Test Card

Multimeter Resistor Test Card

Resistor Test Card for Multimeters

$9.95  $8.99
Save: 10% off




Max: 3

CDI518-116


Multimeter Tool Fluke Meter Volt Meter Ohm Meter CDI 518-116

Multimeter Tool Fluke Meter Volt Meter Ohm Meter CDI 518-116

Replaces discontinued CDI518-16 (series) meters AutoVolt: automatic AC/DC voltage selection Large white LED backlight to work in poorly lit areas Resistance and continuity Min/Max/Average to record...

$299.95




SMI01117


Oil - Fuel Filter Wrench

Oil - Fuel Filter Wrench

This handy wrench removes screw on type marine water separator fuel filters and most oil filters Tough, forged stainless steel

$22.95





CDI551-34PV


Pressure Vacuum Tester Tool Outboard and Outdrives CDI 551-34PV

Pressure Vacuum Tester Tool Outboard and Outdrives CDI 551-34PV

Pressure and Vacuum Tester Repairable metal unit does both vacuum and pressure testing. Screws into the fill on most applications and introduces your choice of vacuum or pressure to test units for...

$219.95




SMI01112


Propeller Nut Wrench (Metal) Mercury, Mariner, and Mercruiser

Propeller Nut Wrench (Metal) Mercury, Mariner, and Mercruiser

Includes nut and 2 tab washers, Removes and Installs all Mercury Outboards (65 HP and up); Mercruisers (110 - 260 HP) Standard Units Wrench replaces 91-95830A1; Nut replaces 11-52707; Tab Washers...

$15.95




GLM90066


Propeller Wrench Kit, Mercury, Mariner, Force, 5/16"

Propeller Wrench Kit, Mercury, Mariner, Force, 5/16"

5/16" Propeller Wrench Kit (red) for Mercury, Mariner and Force Outboard 30-65 HP, 70 HP 3 cylinder 1989 and older, 15-25 HP 4 stroke OEM: 91-856639A1

$12.29





GLM90065


Propeller Wrench Set, Mercruiser, Mercury, Mariner, Force, Honda, 1-1/16"

Propeller Wrench Set, Mercruiser, Mercury, Mariner, Force, Honda, 1-1/16"

1-1/16" Propeller Wrench Kit (blue) for Mercury/Mariner/Force V4 & V6, 75, 90, 100, 115, 125, 135, 150, 175, 200, 225, 250 HP; all Mercruiser; Honda BF75-BF130 comes with GLM21271 OEMs: Mercury:...

$12.29




GLM90062


Propeller Wrench, Mercury, Mariner 5/16"

Propeller Wrench, Mercury, Mariner 5/16"

5/16" Propeller Wrench (red) for Mercury/Mariner 30, 40, 50, 60 HP OEM: 91-859046M3

$12.29




GLM90061


Propeller Wrench, Mercury, Mariner, 1-1/16"

Propeller Wrench, Mercury, Mariner, 1-1/16"

1-1/16" Propeller Wrench (blue) for Mercury/Mariner 75, 90, 100, 115, 125, 135, 150, 175, 200, 225, 250 HP OEM: 91-859046M4

$12.29





GLM90063


Propeller Wrench, Mercury, Mariner, 3/16"

Propeller Wrench, Mercury, Mariner, 3/16"

3/16" Propeller Wrench (yellow) for Mercury/Mariner 20, 25 HP OEM: 91-859046M2

$12.29




GLM90064


Propeller Wrench, Mercury, Mariner, 9/16"

Propeller Wrench, Mercury, Mariner, 9/16"

9/16" Propeller Wrench (purple) for Mercury/Mariner 6, 8, 9. 9, 15 HP OEM: 91-859046M1

$12.29




MER91-849154T1


Puller Flywheel Removal Tool Mercury Mariner Outboards 91-849154T1

Puller Flywheel Removal Tool Mercury Mariner Outboards 91-849154T1

Flywheel Puller It threads into the top of Mercury and Mariner outboards It removes the flywheel from the tapered crankshaft This specialty tool has 1-1/2 - 16 threads. Works on Many engines 30-250...

$139.00





SIE18-9781


Pump Oil for Lower Unit Fits Quart Bottles

Pump Oil for Lower Unit Fits Quart Bottles

Oil Pump for Quart bottle, 4 cc pump and 3/8" - 16 swivel metal marine filler fitting. Ideal for adding Gear Lube and other fluids to small engines and marine lower units. Flexible Hose for...

$15.95




THQF-2K-DP


Quick Flush Outboard Engine Flush Kit Complete Kit Mercury Yamaha

Quick Flush Outboard Engine Flush Kit Complete Kit Mercury Yamaha

Quick Flush™ Outboard Flush Fitting Complete Kit for Mercury, Yamaha and other outboards T-H Marine introduces a quick and easy way to flush any outboard equipped with a flushing port. No more...

$16.95




CDI511-9766


Spark Gap Tester Tool Adjustable 1 to 8 Cylinder 511-9766

Spark Gap Tester Tool Adjustable 1 to 8 Cylinder 511-9766

511-9766 Spark Tester Spark tester can be used to test from 1 to 8 cylinders. Sealed design reduces the possibility of fire. NOTE: If extension wires are needed, order P/N: 511-9903 (set of 4 wires)....

$62.95





CDI511-9764


Spark Gap Tester, Neon Indicator

Spark Gap Tester, Neon Indicator

511-9764 Neon Spark Tester 1 Cyl Sealed spark tester can be used inline to the spark plug while the engine is running or it can be connected to engine ground for cranking speed tests. ...

$20.95




CDI511-9903


Spark Plug Tester Wire Leads

Spark Plug Tester Wire Leads

24" Extension Wire for use with the CDI511-9766 Spark Gap Tester (Set of 4)

$28.95




CDI511-9902


Spark Tester Wire

Spark Tester Wire

7" Extension Wire for use with the CDI511-9766 Spark Gap Tester (Set of 4)

$24.95





CDI511-7900


Switch Remote Starter Diagnositc Tool Mercury Outboard

Switch Remote Starter Diagnositc Tool Mercury Outboard

511-7900 Mercury Remote Starter Remote Starter works with most Mercury engines with the small cannon plug style head 1979-2006.  Replaces boat side control harness at the engine to eliminate...

$183.95




MAL9-79816


Tester Ethanol Fuel Mercury 91-879172T28

Tester Ethanol Fuel Mercury 91-879172T28

Tester for Ethanol percentage. Replaces: Mercury 91-879172T28 Instructions: Fill with water to the line, fill with gas to the neck, put lid on and shake vigorously, stand vertical with cap on, let...

$6.95




CDI519-T125


Thermomelt Temp Stiks, 125 degree F

Thermomelt Temp Stiks, 125 degree F

Stevens Thermomelt Temp Stiks, 125°F Long lasting Temp Stiks provide a quick and reliable means to check cooling systems. With engine warmed up, the temp stik is used like a crayon to make a mark...

$25.95






Monthly Specials For February

DVA Peak Voltage Adapter without leads
DVA Peak Voltage Adapter without leads
$75.95  $60.99
Save: 20% off
Multimeter Resistor Test Card
Multimeter Resistor Test Card
$9.95  $8.99
Save: 10% off
Adaptor, Metric, Grease Filler
Adaptor, Metric, Grease Filler
$11.95  $9.99
Save: 16% off


Home New Items My Info My Cart FAQs Ordering Terms Order Status Privacy Contact Us Dealers Subscribe
ebasicpower.com is © 1999- Basic Power Industries, Inc., all rights reserved • All Item specifications and availability are subject to change without notice
Basic Power Industries • 177 Fulford Dr, Harkers Island, NC 28531-9520, US • +1-252-504-3355