This Is A Secure Site
 |  |
Couplings, Couplers & Kits for Mercruiser
|
| ||
|
Engine Coupler, Mercruiser, up to 350 CID Part Number: BPI11500 Weight: 3.62 Price: $140.95 Quantity in Basket: none | |
| This Coupling fits all GM engines with a two piece rear main seal. All GM V8 engines 1985 and earlier are 2-piece seal engines. This also fits inline GM enignes 1984 and earlier that did not use the triangular coupling. | ||
|
| ||
|
Engine Coupler, Mercruiser, Ford Part Number: BPI11510 Weight: 4 Price: $216.59 Quantity in Basket: none | |
| Coupling used on all Mercruiser Ford engines | ||
|
| ||
|
Coupler, Engine, Mercruiser V6, V8 14" Flywheel Part Number: GLM11530 Weight: 15 Price: $209.95 Quantity in Basket: none | |
|
This is a Triangular shape, Flywheel Mount Engine Coupler with Yoke. This Coupler fits Mercruiser GM V6 and V8 (305 and 350 CID) engines (1983-1993), and 454 Mag Alpha. Replaces OEM: 18643A7 | ||
|
| ||
|
Motor Mounts, Rear, Mercruiser Transom Part Number: GLM21040 Weight: 0.2 Price: $26.09 Quantity in Basket: none | |
|
These are the Rear Motor Mounts that Mercruiser used on MR/Alpha One and Alpha One Stern Drives From 1983 & Up. Two are required per engine. This item replaces OEM: 99297A1 | ||
|
| ||
|
Spacer, Rear Engine Mount Part Number: GLM21050 Weight: 0.02 Price: $2.49 Quantity in Basket: none | |
|
Rear Engine Mount Spacer for MAL9-58000 Motor Mount Replaces: 23-99322 | ||
|
| ||
|
Motor Mount, Rear, Mercruiser Transom Part Number: MAL9-58000 Weight: 0.14 Price: $22.95 Quantity in Basket: none | |
| This is a Rear Motor Mount with spacer for Mercruiser Inboard/Outboard. This item replaces Merc.OEM: # 99297A1. | ||
|
| ||
|
Engine Coupler, Mercruiser GM V6, Small Block V8 Part Number: MAL9-72500 Weight: 3.1 Price: $190.95 Quantity in Basket: none | |
| This is a Coupling for a Mercruiser sterndrive. It is generally used when replacing a 2 piece rear main seal engine with the newer 1 piece rear main seal engine (V-6 & V-8 small block). it is held on the crankshaft by the same studs that hold the flywheel on. This item replaces Merc. # 14505A2. | ||
|
| ||
|
Engine Coupler, Mercruiser Ford 225, 233, 888 Part Number: MAL9-72501 Weight: 3.11 Price: $189.95 Quantity in Basket: none | |
| This Coupling fits all of the V8 Ford based Mercruiser sterndrive engines. This item replaces Merc. # 58926A3. | ||
|
| ||
|
Engine Coupler, Mercruiser, up to 350 CID Part Number: MAL9-72502 Weight: 3.1 Price: $140.95 Quantity in Basket: none | |
| This Coupling fits all GM engines with a two piece rear main seal. All GM V8 engines 1985 and earlier are 2 piece seal engines. This also fits inline GM enignes 1984 and earlier that did not use the triangular coupling. | ||
|
| ||
|
Engine Coupler, Mercruiser Bravo Part Number: MAL9-72503 Weight: 12.86 Price: $319.95 Quantity in Basket: none | |
| This is the round coupling that fits the Mercruiser Bravo Outdrive. It replaces Merc. # 18311A17 & # 861523A9. | ||
|
| ||
|
Engine Coupler Assembly, Mercruiser 470, 485 Part Number: MAL9-72504 Weight: 4.72 Price: $250.95 Quantity in Basket: none | |
| This is an Engine Coupler or a Mercruiser Sterndrive with a 3.7L engine. This coupling is the model that is held on with the same studs that hold the flywheel on. This is the earlier coupling. The later version was held onto the flywheel with separate bolts. This was usually used on 1982 and earlier I/O units. This item replaces Merc. # 69354A2. | ||
|
| ||
|
Engine Coupler Assembly, Mercruiser 3.7L 83-89 Part Number: MAL9-72505 Weight: 4.26 Price: $259.95 Quantity in Basket: none | |
| This is an Engine Coupler for a Mercruiser Sterndrive with a 3.7L (224 cid) engine. This coupling can be identified by being held on the flywheel with bolts, and not by the same studs that hold the flywheel on the motor. | ||
|
| ||
|
Engine Coupler, Mercruiser 4 Cyl.87-98 Part Number: MAL9-72506 Weight: 9.58 Price: $150.95 Quantity in Basket: none | |
| This triangular coupling fits all four cylinder engines with a 12 inch flywheel that had a triangular coupling originally. If you do not know your flywheel diameter you can look at your starter. If you starter is held on with 1 long and 1 short bolt the flywheel diameter is 12 inches. If your starter is held on with 2 long bolts the flywheel diameter is 14 inches. | ||
|
| ||
|
Engine Coupler, Mercruiser MR, Alpha 14 Inch Flywheel Models Part Number: MAL9-72507 Weight: 9.8 Price: $150.95 Quantity in Basket: none | |
| This triangular coupling fits all applications that use a 14 inch flywheel on Mercruiser Alpha drives. This fits V8 & V6 from 1987 and newer and 4 cylinder 3.0L engines 1999 and newer with a 14 inch flywheel. If you do not know your flywheel diameter you can look at your starter. if you starter is held on with 1 long and 1 short bolt the flywheel diameter is 12 inches. If your starter is held on with 2 long bolts the flywheel diameter is 14 inches. | ||
|
| ||
|
Coupling Assembly, Mercruiser 3.7L 76-82 Part Number: MER69354A2 Weight: 4.7 Price: $299.00 Quantity in Basket: none | |
|
Coupling Assembly fits Mercruiser 224 cid/3.7L 4 cyl. 1976-1982 | ||
|
| ||
|
Coupler Assembly, Mercruiser Bravo, Heavy Duty Part Number: MER861523A11 Weight: 21.75 Price: $479.00 Quantity in Basket: none | |
|
Coupler Assembly for Bravo Models round style New heavy duty design replaces 18311A17 (supersedes MER861523A9) | ||
|
| ||
|
Coupler Assembly, Mercruiser Bravo, Standard Part Number: MER861523A9 Weight: 12.94 Price: $379.00 Quantity in Basket: none | |
|
Standard Round Coupling for Bravo | ||
|
| ||
|
Coupler-Mercruiser I, O 14" Flywheel Part Number: SIE18-2175 Weight: 13.98 Price: $219.95 Quantity in Basket: none | |
|
flex plate style coupling for late Model small crankshaft bolt pattern style engines with 14 flywheel Replaces: 18643A7 
| ||
|
| ||
|
Coupler-Engine Mercruiser 4 Cylinder Part Number: SIE18-2195 Weight: 14.12 Price: $219.95 Quantity in Basket: none | |
|
Replaces: 12632A7 Flex plate style for GM 4 Cylinder Engines with late style, small crankshaft bolt pattern
| ||
